Synthetic Crimped Polypropylene Fiber Grey Polypropylene PP Fiber

Synthetic Cripmed Polypropylene Fiber Grey Polypropylene Pp FiberDescriptionElite Concrete Fiber was produced by referring foreign advanced technology for fiber spinning, modified by adding functional additive and special surface-treating. Mixing into cement concrete, it has many advantages such as good dispersing, better water

Featured Products

Synthetic Cripmed Polypropylene Fiber Grey Polypropylene Pp Fiber

Description

Elite Concrete Fiber was produced by referring foreign advanced technology for fiber spinning, modified by adding functional additive and special surface-treating. Mixing into cement concrete, it has many advantages such as good dispersing, better water affinity, strong linking force. It is suited to reinforce and crack-resist to every kinds of cement concrete and mortar, specially used in
engineering of building surface, floor, wall etc…..

Synthetic Cripmed Polypropylene Fiber Grey Polypropylene PP Fiber

Technical Information
 
Minimum Tensile Strength>550 MPa
Modulus>9000 Mpa
Fibre dimensionL:48 mm /55 mm /65mm;
Melt Point170ºC
Density0.91g/cm3
Melt flow3.5
Acid&Alkali ResistanceExcellent
Moisture Content≤0%
AppearanceWhite, black, gray, Embossed

Features

1. Provides good impact,fatigue,shrinkage control and ductility in all grade concretes.
2. Cost saving,Is easier to use,to disperse and safe to handle.
3. Can be used in highly corrosive circumstance.
4. The surface has been embossed,which greatly improves the cohesive force between fibres and concrete,and also boosts shrinkage resistance and crack resistance.
5. The toughness of macro synthetic fibre is less stronger than steel fibre. But test has shown slabs on  grade and pre-cast concrete predominately require a dosage rate of between 25kg-40kg of steel fibres per cubic meter, in comparison,using between 3kg-10kg of macro synthetic fibre per cubic meter of concrete. Synthetic fibres achieve greater strength and ductility in the matrix.
 
Packing

5kg/box, 1200-1300kg/pallet, 12800kg/20' container, 25800kg/40' container.
Synthetic Cripmed Polypropylene Fiber Grey Polypropylene PP Fiber


Estimating Dosage

The dosage rate is dependent on the application however the minimum dosage range is 2kg-6kg/m3.

Typical Application

Shotcrete, and engineering industries, concrete project,like:
1.Slab on Grade and elevated construction (distribution centers, warehouses, etc.)
2.Thin walled precast (septic tanks, vaults, walls, etc.)
3.Shotcrete for tunnel linings, pool construction and slope stabilization
4.Pavements and white-toppings
 Synthetic Cripmed Polypropylene Fiber Grey Polypropylene PP Fiber

 
How should the fibre be used?

The fibres are wrapped with water-soluble film and uniquely packaged in water soluble paper boxes.Just throw the whole boxes of fibres into the concrete mixture, the boxes and film will dissolve within seconds, leaving the fibres to disperse evenly throughout the mixture.

Our Company

ELITE was established in 2007, has become one of the leading and professional suppliers of many kinds of Concrete Reinforcement Fibers in the world market.
ELITE fibers are made by 100% virgin materials with advanced equipment of yarn and cutting. We have one full set of precise testing instrument and quality inspection team, technology research & Development team.
Elite own a team with 10+ years experience.We know well of Chinese Concrete reinforcement fibers   on technical inspection, marketing, transportation.

Synthetic Cripmed Polypropylene Fiber Grey Polypropylene PP Fiber
Synthetic Cripmed Polypropylene Fiber Grey Polypropylene PP Fiber


Pls feel free to contact us freely at any time
Ms. Helen Chu
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours